Provided GPSD is reading the strings, there should be no major changes required to Kismet to get it to work. If you don't, double check your reciever and port.
You should be seeing GPS NMEA strings go flying by. Where 'X' is the number of the com port your reciever is hooked up to (com1, com2, etc).ģ.2 Provided your reciever is outputting NMEA sentences and has a fix, you can test GPSD quickly through telnet: Kismet is not available for Windows but there are plenty of alternatives that runs on Windows with similar functionality. However with my limited testing, I've found you should be able to get by with just the following: Provided you have installed all the packages nessecary, GPSD should compile with a minimal amount of complaining.ģ.1 Depending on your GPS reciever, there may be some changes nessecary to running GPSD. You should see the following, if you don't try again from the beginning: Switch into the gpsd directory and patch the source: Then copy the cygwin-2.diff file into the newly created gpsd-2.30 directoryĢ.3 Now we need to patch the GPSD source so that Cygwin can compile. Feel free to figure out what isn't needed and let me know.ġ.3 Under Development, add the following packages to be installed:ġ.4 Let the installer do it's thing until Cygwin is installedġ.5 Start Cygwin and once you get a prompt type the following to setup cygwin so the compiler can see your local windows users:Ģ.2 Untar the GPSD tarball with the following: Warning: This can end up taking of a couple gig on your drive. 1.1 Download Cygwin setup from and start the installer.ġ.2 Follow the instructions and install the default system.
0 kommentar(er)
